MOVS/MOVSB/MOVSW/MOVSD--Move Data from String to String

Description

Moves the byte, word, or doubleword specified with the second operand (source operand) to the location specified with the first operand (destination operand). Both the source and destination operands are located in memory. The address of the source operand is read from the DS:ESI or the DS:SI registers (depending on the address-size attribute of the instruction, 32 or 16, respectively). The address of the destination operand is read from the ES:EDI or the ES:DI registers (again depending on the address-size attribute of the instruction). The DS segment may be overridden with a segment override prefix, but the ES segment cannot be overridden.

At the assembly-code level, two forms of this instruction are allowed: the "explicit-operands" form and the "no-operands" form. The explicit-operands form (specified with the MOVS mnemonic) allows the source and destination operands to be specified explicitly. Here, the source and destination operands should be symbols that indicate the size and location of the source value and the destination, respectively. This explicit-operands form is provided to allow documentation; however, note that the documentation provided by this form can be misleading. That is, the source and destination operand symbols must specify the correct type (size) of the operands (bytes, words, or doublewords), but they do not have to specify the correct location. The locations of the source and destination operands are always specified by the DS:(E)SI and ES:(E)DI registers, which must be loaded correctly before the move string instruction is executed.

The no-operands form provides "short forms" of the byte, word, and doubleword versions of the MOVS instructions. Here also DS:(E)SI and ES:(E)DI are assumed to be the source and destination operands, respectively. The size of the source and destination operands is selected with the mnemonic: MOVSB (byte move), MOVSW (word move), or MOVSD (doubleword move).

After the move operation, the (E)SI and (E)DI registers are incremented or decremented automatically according to the setting of the DF flag in the EFLAGS register. (If the DF flag is 0, the (E)SI and (E)DI register are incremented; if the DF flag is 1, the (E)SI and (E)DI registers are decremented.) The registers are incremented or decremented by 1 for byte operations, by 2 for word operations, or by 4 for doubleword operations.

The MOVS, MOVSB, MOVSW, and MOVSD instructions can be preceded by the REP prefix (see "REP/REPE/REPZ/REPNE /REPNZ--Repeat String Operation Prefix" in this chapter) for block moves of ECX bytes, words, or doublewords.

Operation

DEST SRC;
IF (byte move)
THEN IF DF 0
THEN
(E)SI (E)SI + 1;
(E)DI (E)DI + 1;
ELSE
(E)SI (E)SI - 1;
(E)DI (E)DI - 1;
FI;
ELSE IF (word move)
THEN IF DF 0
(E)SI (E)SI + 2;
(E)DI (E)DI + 2;
ELSE
(E)SI (E)SI - 2;
(E)DI (E)DI - 2;
FI;
ELSE (* doubleword move*)
THEN IF DF 0
(E)SI (E)SI + 4;
(E)DI (E)DI + 4;
ELSE
(E)SI (E)SI - 4;
(E)DI (E)DI - 4;
FI;
FI;

Flags Affected

None.

Protected Mode Exceptions

#GP(0) - If the destination is located in a nonwritable segment. If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. If the DS, ES, FS, or GS register contains a null segment selector.

#SS(0) - If a memory operand effective address is outside the SS segment limit.

#PF(fault-code) - If a page fault occurs.

#AC(0) - If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.

Real-Address Mode Exceptions

#GP - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.

#SS - If a memory operand effective address is outside the SS segment limit.

Virtual-8086 Mode Exceptions

#GP(0) - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.

#SS(0) - If a memory operand effective address is outside the SS segment limit.

#PF(fault-code) - If a page fault occurs.

#AC(0) - If alignment checking is enabled and an unaligned memory reference is made.

For details, see Volume 2A and Volume 2B of the Intel(R) 64 and IA-32 Intel Architecture Software Developer's Manual. For the latest updates on the instruction set information, go to the web site.